Sanhua Chemistry Material Company
5 1

Epoxy Resin Electronic Potting Glue, Sealant Series

Contact Now* Send an Inquiry to this supplier.
or
Start Order * Name your price

Browse by Category

Contact us

Sanhua Chemistry Material Company
[China]

Address
DONGJIANG AREA QIAOTOU TOWN DONGGUANG CITY Dongguan Guangdong
Phone
86-0769-82730558
Contact name
Jess Lee

Quick Information

  • Place of Origin: China
  • Application : Lighting
  • Package Type : Throught Hole
  • Type : Polypropylene Film Capacitor
  • :

Description

Third, storage period: 25 ° C × 6 months Fourth, curing conditions: usable time: 25 ° C - 20 minutes, room temperature curing: 8 hours Five, curing characteristics: Induction rate 1KHZ 3.12 Lure loss 1KHZ 0.03 Compressive strength kg/mm2 25 Bending strength kg/mm2 11 Tensile strength kg/mm2 16.5 Impact strength kg/mm2/cm2 >8.5 Dielectric constant 1KHZ 3.8~4.2 Hardness SHORE D 79-81 Thermal conductivity: W/m.k 0.025 Heat distortion temperature °C 82-98 Volume resistance 25°C Ohm-cm 1.35 × 1015 Surface resistance 25°C Ohm 1.2× 1014 Withstand voltage 25°C Kv/mm 16~18 Water absorption rate (24 hours 25 ° C) % <0.01 Six, note: ● The products to be potted need to be kept dry and clean; ● Please check the A agent first, observe whether there is any sedimentation, and stir the A agent evenly; ● According to the ratio of the ratio, and the weighing is accurate, please remember that the ratio is the weight ratio rather than the volume ratio. After mixing the A and B agents, stir well to avoid incomplete curing. ● After mixing evenly, please fill the glue in time, and try to use the mixed glue in the available time; ● After infusion, the glue will gradually penetrate into the gap of the product, and if necessary, please perform secondary filling; ● Keep the environment clean during the curing process to prevent impurities or dust from falling onto the surface of the uncured glue. ● This product will gradually solidify after mixing, its viscosity will gradually increase, and some heat will be released; ● The more glue that is mixed together, the faster the reaction will be, the faster the curing speed will be, and it may be accompanied by a large amount of heat. Please pay attention to the amount of glue once, because the time is available due to the quick reaction. It will also be shortened, and the mixed glue will be used as soon as possible in a short time; ● Usable time: refers to the time when the viscosity of 100g mixed glue is doubled at 25°C. After the operation time, the glue can never be used; ● There are very few people who have contact with the glue for a long time, which may cause mild skin irritation and mild itching. It is recommended to wear protective gloves when using it. Stick to the skin, wipe it with acetone or alcohol, and clean it with detergent. ● Before using it in large quantities, please try it a small amount and master the skill of using the product to avoid mistakes. Seven, [storage and packaging] ● This product should be sealed and stored in a ventilated, cool and dry place. The shelf life is six months. After the expiration of the test, it can be used continuously. ● The package size is 25kg per group.


Product Image

  • Epoxy Resin Electronic Potting Glue, Sealant Series image

Other products from this supplier

Related products from premium suppliers on EC21

Send an Inquiry to this supplier

Send an Inquiry to this supplier
* From
  To Jess Lee
Sanhua Chemistry Material Company
* Buying Product
- Please enter your specific buying item.
e.g. 42 inch LCD TV, leather executive chair
Category : Capacitors
* Message

Use English only Max. 2000 characters. (Min. 20)

Send
EC21.com does not guarantee the validity of product information or the credentials of sellers.